GHOST Tattoo Feeder. Power and Stability are its strength.
CHARACTERISTICS OF THE FOOD TATTOOONS FOR GHOST
The GHOST tattoo feeder was designed, designed and manufactured in our laboratories. From the design of the printed circuit to the realization of the
firmware that manages all its features, all strictly Made in Italy . Its two main features are power and stability. Power because the GHOST delivers an output current of 3 constant Amperes and 10 peak amps. Stability because, once set, the output voltage is always the same even in the presence of changes in voltage caused by the electrical system.
Small notions of electronics applied to the tattoo.
To clarify once and for all how many Ampère must have a tattoo feeder, one should know that a reel machine consumes at most 1 Amp while a rotary consumes 0.5.
The GHOST works with all types of tattoo machines, both reels and rotary . The upper panel consists of a polycarbonate membrane that drives all the power supply controls. This is not a capacitive or resistive membrane, but rather real electronic buttons that can be operated simply by pressing. The feeder can be wrapped in the film, for greater hygiene, without compromising its operation and all the controls respond correctly.
On the front panel there is, in addition to the machine output, a large 3-digit LED display that shows the output voltage expressed in Volts.
MANUAL MODE vs MEMORY MODE
The power supply works in two modes: Manual or Memory. In Manual mode the tattoo artist adjusts the desired output voltage. Once the power supply has been turned off and on again, the Manual mode remembers the previously set voltage. In Memory mode, on the other hand, 5 different output voltages can be set in 5 different memories that can be recalled using the appropriate button. For example, in
memory 1 I memorize the voltage of the machine by lines; in
memory 2 that of the color machine; in the
memory 3 the output voltage of the press. The memorization takes place automatically after a few seconds from the setting.
PEDALE SI / PEDALE NO
The GHOST can also be used without the pedal. Thanks to the control on the upper part, the machine is operated and, by pressing it again, it stops. Very useful for long sessions and for jobs in uncomfortable positions. Instead, insert the pedal into the appropriate connector on the rear panel, the receiver immediately recognizes the presence of the pedal and has the possibility of 2 different settings. The impulsive mode provides voltage to the machine when the pedal is held down and stops it when the pedal is released. The continuous mode, on the other hand, provides tension at the first pressure and release of the pedal, while the next time the pedal is pressed and released, the voltage is interrupted. This mode is also very useful for long or uncomfortable sessions.
UNIQUE WARRANTY!
The GHOST tattoo power supply warranty is 3 years ! We are the only ones to give this guarantee because we know what we do.
ACCESSORIES INCLUDED
The GHOST is supplied with the universal multi-plug switching
external adapter . The
switching technology allows to use the power supply in all the countries of the world.
WEIGHT AND SIZE
Weight: 250g
Dimensions: L 86 mm XP 100 mm XH 40 mm
